
Sacramento Emergency Plumber Service Have you ever poured grease from a pan down your sink? Do you know how bad this can be for your plumbing system? Use the expert advice in this article for many more critical tips and tricks that you need to know in regards to your home plumbing.
Roots from a tree in your back yard can be a real headache when it comes to plumbing. Make sure if you have a big tree or bush or some kind of plant with a big root system, that you ask your plumbing company about root killing agents. You can flush these down your toilet and kill any roots that may be blocking your pipes and save yourself a lot of money by stopping a back up before it happens.
To winterize a house that will sit unused during the winter months, you must completely drain all of the pipes. After turning off the main water supply, let all of the water drain from the faucets, toilets, and water heater (turn off the gas). Add a quart of antifreeze to sinks and the tub to prevent water from freezing in the drain trap.
If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.
You can remove unsightly mineral buildup from your shower head by soaking it in vinegar overnight. This loosens the deposits, and in the morning you only need to wipe off the residue with a rag. If your shower head is high up an not removable, place vinegar in a plastic bag, slip the bag over the shower head and hold in place with a twist tie.
If your water is coming out black, then most likely you have an iron and magnesium issue to your water. You need to contact a water softener company, and get them to come out and assess your water. They will be able to fix the problem by adding a water softener.
Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.
If you notice water draining into your dishwater, check your kitchen sink. The hose might not be installed properly. Your hose must run in a hill pattern to avoid water mixing. Think of the St. Louis Arch -- start from your sink, go uphill with the hose, and then down before connecting to the dishwasher. This way, only pressurized water can travel through the hose. Leakage won't be an issue.
Now that you have an idea on where to start crafting your own plumbing techniques, are you ready to start experimenting? Are you ready to apply what you read to your system? Can you start bettering your home plumbing smartly and safely? If you can, then have fun! If not, make sure to go back through the tips again.
No comments:
Post a Comment